 |
Bulkheads: Bulkhead connector receptacles are designed to be mounted to your pressure vessel. They are capable of handling 10,000 psi pressure differential (open face). Bulkheads are available in aluminum, brass, or stainless steel. Other materials can be made by special request. |
 |
 |
Inlines: Inline connector plugs are available as pigtails or can be molded onto your cable. The standard pigtail length is 1 meter. However, you may specify any length. Inline connectors plug into a bulkhead receptacle or another inline connector. |
 |
 |
Dummies: Dummy connectors are used to blank off either a bulkhead receptacle, or an inline connector to prevent salt water from touching the gold plated contacts. |
 |
 |
Locking Sleeves: Although not necessary for operations, locking sleeves can make sure that connectors will not disengage due to pulling loads on the cable. Locking sleeves are available in Delrin, Aluminum or Stainless Steel. |
 |